Rower & Rub | Arena Maintenance | Track Planer | Riding Track Drag | Hippodrome Roller
Rower & Rub Track Planer View on the Rower & Rub website
The track planer - a simple, but intelligent solution
The height of the rake frame with its replaceable harrows can be continuously adjusted using a jackscrew
The blades are vertically and diagonally adjustable
A spring pack controls the scope of the overload safety device
If the operator drives close to the edge when the roller is set at the correct angle, the frame will push itself away behind the three-point hitch
The riding track leveller can be supplied with working widths of 2.30 m (L) and 2.70 m (X)
Fitted with a three-point hitch connection point
Basic construction hot-dip galvanised according to DIN 50976 tZn0
High quality European methods and materials
Rower & Rub Riding Track Drag View on the Rower & Rub website
A thin surface layer and mats or fleece as a substructure - the riding track drag is best suited to handle the altered structure of today's riding surfaces.
The equipment with wall lining scrapers and roller wheel can be supplied with working widths of 2.00/2.50/3.00 m and is suitable for drags from 30 HP.
The basic construction is hot-dip galvanised according to DIN 50976 tZn0
Two angle rails chisel the surface straight off.
The rake frame with a replaceable rake distributes and compacts the surface.
The height of the rake frame with the replace+D9544able spring-loaded teeth can be continuously adjusted.
Additional sliding rails on the supporting members ensure a long life.
Can also be supplied without a rake frame, comb harrow frame or wall lining scraper.
High quality European methods and materials
Rower & Rub Hippodrome Roller View on the Rower & Rub website
The hippodrome roller is an all-rounder when it comes to floor maintenance
The equipment can be supplied in widths of 1.70 or 2.20 m.
The basic construction is hot-dip galvanised according to DIN 50976 tZn0.
The rake teeth swirl the surface layer.
The adjustable blades pull the surface straight and the roller wheel compacts the ground.
The frame can be continuously adjusted with the use of a jackscrew.
A ball head holder makes connection to a quad possible.
Can also be supplied with a three-point hitch connection point.
For transportation, the frame is adjusted with the jackscrew so that the equipment runs on the roller wheel.
The rake teeth can be replaced.
High quality European methods and materials
Arena Maintenance | Track Planer | Riding Track Drag | Hippodrome Roller
